Motortech MIC500 - Mechanical Data; Warning Notices on the Device; Product Identification - Labeling on the Device

4 PRODUCT DESCRIPTION
20 Rev. 01/2015
4.2.2 Mechanical Data
The devices of the MIC500 series have the following mechanical characteristics:
Feature Value
Dimensions see chapter Overview Drawings on page 23
Weight 2.1 kg (4.7 lbs)
Shape of device see chapter Overview Drawings on page 23
Climatic environmental
conditions
-40°C to +70°C (-40°F to +158°F)
4.2.3 Warning Notices on the Device
EXPLOSION HAZARD! Do not open cover for timing adjustment and RS232 interface unless area is
known to be non-hazardous.
WARNING! Read and understand the installation and operating manual prior to installing or
making any adjustments.
EXPLOSION HAZARD! Do not disconnect while circuit is live unless area is known to be non-
hazardous. For wiring details please refer to the operating manual.
CAUTION! Do not pressure wash this ignition module. Damage to electronic components may
result.
4.2.4 Product Identification – Labeling on the Device
The necessary numbers for unique product identification are on the device:
– P/N: Product number of the ignition controller
– S/N: Serial number of the ignition controller