8 ADJUSTMENTS
72 Rev. 01/2015
8.3 Conventions Used in the Following
In the subsequent sections, the views that allow you to enter settings or provide you with
information will be explained. Therefore, the following conventions apply:
Key Combinations
– The keys to be pressed on the computer keyboard or the hand-held programmer are shown
in square brackets, e. g. [E] indicates the E key.
– A plus symbol (+) between two keys indicates that they are to be pressed simultaneously.
– The key combinations for the computer keyboard also apply to the hand-held programmer,
unless otherwise stated.
– In the Ignition Control software, the corresponding buttons (see Menu Bar and Buttons on
page 68) can also be used.
Short Hand Notation
Setting changes to be carried out are indicated in abbreviated form, using an arrow (->) to
separate the individual steps.
Example
[Shift]+[E] -> [F1] -> Enter energy level -> [Enter] -> [F5]
Meaning
1. Press the shift key and the E key simultaneously.
2. Press the F1 key or click on the F1 button in Ignition Control.
3. Enter the energy level.
4. Press the Enter key on your computer keyboard or click on the Enter button in Ignition
Control.
5. Press the F5 key or click on the F5 button in Ignition Control.
To Next Page
Loading...
