Moxa Technologies ioThinx 4510 Series User Manual

ioThinx 4510 Series Software Tools
4-25
Disable Mode
The TC channel can be disabled. You may only disable channels one-by-one. When a channel has been
disabled, the sample rate of the remaining channels will be increased automatically.
Channel Name: The channel name is used for representing this channel (max. length = 16, “.” character is
not allowed).
1st Point Measured Value: The 1
st
point value in the range of the channel mode to be scaled to the 1st
Point Scaled Value (acceptable input value depends on the type of sensor).
2nd Point Measured Value: The 2
nd
point value in the range of the channel mode to be scaled to the 2nd
Point Scaled Value (acceptable input value depends on the type of sensor).
Unit: The unit of the measured value.
1st Point Scaled Value: The scaled value of the 1
st
point (-4294967295 to 4294967295).
2nd Point Scaled Value: The scaled value of the 2
nd
point (-4294967295 to 4294967295).
Scaled Unit: The unit of the scaled value (max. length = 8, “.” character is not allowed).

Moxa Technologies ioThinx 4510 Series Specifications

General

Brand	Moxa Technologies
Model	ioThinx 4510 Series
Category	Controller
Language	English