To Next Page

To Previous Page

B. SNMP Agent with MIB II & RS-232-Like

Group

SNMP (Simple Network Management Protocol) agent software is built into the NPort 5600-8-DT/DTL. It

supports SNMP Trap, the RFC1317 RS-232-like group, and RFC1213 MIB-II. The following table lists the

standard MIB-II group and the variable implementation for the NPort 5600-8-DT/DTL.

RFC1213 MIB-II supported SNMP variables:

System MIB Interfaces MIB IP MIB ICMP MIB

SysDescr itNumber ipForwarding IcmpInMsgs

SysObjectID ifIndex ipDefaultTTL IcmpInErrors

SysUpTime ifDescr ipInreceives IcmpInDestUnreachs

SysContact ifType ipInHdrErrors IcmpInTimeExcds

SysName ifMtu ipInAddrErrors IcmpInParmProbs

SysLocation ifSpeed ipForwDatagrams IcmpInSrcQuenchs

SysServices ifPhysAddress ipInUnknownProtos IcmpInRedirects

ifAdminStatus ipInDiscards IcmpInEchos

ifOperStatus ipInDelivers IcmpInEchoReps

ifLastChange ipOutRequests IcmpInTimestamps

ifInOctets ipOutDiscards IcmpTimestampReps

ifInUcastPkts ipOutNoRoutes IcmpInAddrMasks

ifInNUcastPkts ipReasmTimeout IcmpOutMsgs

ifInDiscards ipReasmReqds IcmpOutErrors

ifInErrors ipReasmOKs IcmpOutDestUnreachs

ifInUnknownProtos ipReasmFails IcmpOutTimeExcds

ifOutOctets ipFragOKs IcmpOutParmProbs

ifOutUcastPkts ipFragFails IcmpOutSrcQuenchs

ifOutNUcastPkts ipFragCreates IcmpOutRedirects

ifOutDiscards ipAdEntAddr IcmpOutEchos

ifOutErrors ipAdEntIfIndex IcmpOutEchoReps

System MIB Interfaces MIB IP MIB ICMP MIB

ifOutQLen ipAdEntNetMask IcmpOutTimestamps

ifSpecific ipAdEntBcastAddr IcmpOutTimestampReps

ipAdEntReasmMaxSize IcmpOutAddrMasks

IpNetToMediaIfIndex IcmpOutAddrMaskReps

IpNetToMediaPhysAddress

IpNetToMediaNetAddress

IpNetToMediaType

IpRoutingDiscards

Moxa Technologies NPort 5600-8-DT Series User Manual

Other manuals for Moxa Technologies NPort 5600-8-DT Series