NPort 5600-8-DT/DTL Series Overview of Hardware
NPort 5600-8-DTL
1
10/100 Mbps, auto MDI/MDIX
8-pin RJ45
Magnetic Isolation Protection:
1.5 KV built-in
Ports: 8
-8-DTL: RS-232
NPort 5650-8-DTL/5650I-8-DTL: RS-232/422/485
DB9 male
15 KV ESD protection for all signals
2 KV isolation protection (NPort 5650I
-8-DTL only)
-485 Data Direction Control: ADDC® (automatic data direction control)
Pull High/Low Resistor for RS
-485: 1 KΩ, 150 KΩ
-485: 120 Ω
Serial Communication Parameters
5, 6, 7, 8
1, 1.5, 2
None, Even, Odd, Space, Mark
Control: DSR/DTR and RTS/CTS (RS-232 only), XON/XOFF
50 bps to 921.6 Kbps
-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422: Tx+, Tx-, Rx+, Rx-, GND
-485-4w: Tx+, Tx-, Rx+, Rx-, GND
-485-2w: Data+, Data-, GND
ICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet, DNS, SNMP V1, HTTP, SMTP, SNTP, Rtelnet,
ARP, RFC2217
Web Console, Telnet Console, Serial Console, Windows Utility
Windows Real COM Drivers:
Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8 x86/x64,
Windows 2012 x64, XP Embedded
SCO Unix, SCO OpenServer, UnixWare 7, UnixWare 2.1, SVR 4.2, QNX 4.25, QNX 6,
Solaris 10, FreeBSD, AIX 5.x, HP
-UX 11i
rs: Linux kernel 2.4.x, 2.6.x, 3.x
Metal, IP30 protection
-8-DTL: 1760 g
-8-DTL: 1770 g
NPort 5650I-8-DTL: 1850 g
Without ears: 197 x 44 x 125 mm (7.76 x 1.73 x 4.92 in)
ears: 229 x 46 x 125 mm (9.01 x 1.81 x 4.92 in)
-Rail kit on bottom panel: 197 x 53 x 125 mm (7.76 x 2.09 x 4.92 in)
Standard Models: 0 to 60°C (32 to 140°F)
-40 to 75°C (-40 to 167°F)