Moxa Technologies NPort 5600-8-DT Series User Manual

NPort 5600-8-DT/DTL Series Using NPort Administrator
8-24
Removing a Port from a COM Group
Follow the steps below to remove a serial port from a COM Group:
1. Select a serial port in the Group and right-click to select COM Settings.
2. Select a COM number that is not in use or assigned to a Group and click OK.
3. You will be able to view the serial ports that were assigned to and removed from the Group. Click Apply to
apply the settings.
4. Finally, click Yes to confirm.
www.ipc2u.ru
www.moxa.pro

Moxa Technologies NPort 5600-8-DT Series Specifications

General

Brand	Moxa Technologies
Model	NPort 5600-8-DT Series
Category	Server
Language	English