MR TAPCON 250 - Commissioning; Commissioning wizard; Performing tests

8 Commissioning
Maschinenfabrik Reinhausen GmbH 202274 8595028/00 ENTAPCON
®
250
8 Commissioning
NOTICE
Damage to device and system periphery
An incorrectly connected device can cause damage to the device and sys-
tem periphery.
► Check the entire configuration before commissioning.
8.1 Commissioning wizard
If you want the device to help when setting the relevant parameters, you can
use the commissioning wizard. The commissioning wizard provides a selec-
tion of parameters that you can configure in order.
A detailed description of each of the parameters can be found in the Opera-
tion [►Section 9, Page 84] chapter.
To call up the commissioning wizard, you will need the necessary access
rights.
When in delivery status, you can log in as the administrator as follows:
▪ User name: admin
▪ Password: admin
1. Log in as a user with the necessary access rights.
2. Go to Settings > Commissioning wizard.
3. Press the Next button to launch the commissioning wizard.
4. Follow the on-screen instructions.
Once you have entered all of the parameters relevant to commissioning,
continue with the function test.
8.2 Performing tests
Please contact Maschinenfabrik Reinhausen GmbH (MR) if any aspect of
the tests is not clear.