MR TAPCON 250 - Introduction; Manufacturer; Completeness; Safekeeping

1 Introduction
Maschinenfabrik Reinhausen GmbH 20228 8595028/00 ENTAPCON
®
250
1 Introduction
This technical file contains detailed descriptions on the safe and proper in-
stallation, connection, commissioning and monitoring of the product.
It also includes safety instructions and general information about the prod-
uct.
This technical file is intended solely for specially trained and authorized per-
sonnel.
1.1 Manufacturer
The product is manufactured by:
Maschinenfabrik Reinhausen GmbH
Falkensteinstraße 8
93059 Regensburg
Tel.: (+49) 9 41/40 90-0
E-mail: sales@reinhausen.com
Further information on the product and copies of this technical file are avail-
able from this address if required.
1.2 Completeness
This technical document is incomplete without the following supporting docu-
ments:
▪ Connection diagrams
▪ Operating Instructions
– Available as a download on the device
– Available for download at www.reinhausen.com
– Available for download in the MR Customer Portal
1.3 Safekeeping
Keep this technical document and all supporting documents ready at hand
and accessible for future use at all times. Download the operating instruc-
tions from the device. The operating instructions are also available on the
Maschinenfabrik Reinhausen GmbH website and in the MR Customer Portal.
1.4 Notation conventions
1.4.1 Hazard communication system
Warnings in this technical file are displayed as follows.