© Munters AB, 2020 82
o
Closed: The circuit is closed when the sensor is activated.
9. In System > Devices and Sensors > Installation, define one relay as Batch Release
Valve. This relay opens the batch bin, releasing mixed feed into a hopper.
10. Define:
o
Default Output: Normally open or normally close.
o
Seconds to close Valve: Define the amount of time required for the release
valve to go from opened to closed. Range: 0 – 255. Default 10.
o
Test checks the relay functionality.
NOTE Testing stops the weigher process.
To Next Page
