1
2
3
4
Advanced Fax Functions
Scan Related Settings 4-5
Specify the destination.
4
The scanned document image is displayed on the screen.
(For a one-sided document)
(For a duplex document)
The first document image is displayed on the screen.•
If you performed duplex scanning, the document image for both the front and back sides is •
displayed.
If series copying was set, the document image for the two divided pages is displayed.•
When you press [Delete] and then [Yes] while the first page of document is displayed, the •
operation will be canceled.
When you press [Delete] and then [Yes] while the second page or later of document is •
displayed, the image will be deleted. Then the machine asks you whether to continue
the operation or start the transmission. To continue the operation, press [Next Doc]. To
start the transmission, press [Tx Start].
Press [Close].
5
If there is another document, scanning of the next document will begin. If there is not another
document, transmitting will begin.
Since the image is displayed with a set size, the size of the image will differ from the
actual size. For example, when you scan a Legal size document, the displayed image is the
same size as when you scan a Letter size document.
To Next Page
Loading...
Need help?
General
