7-16 Registering Destinations
Registering / Editing
The following items can be registered for each folder shortcut.
Item Description
Shortcut Name This is the button name displayed on the screen. Up to 24 characters
can be entered.
If you do not register a name, the link will be displayed on the
shortcut key. When the link is too long to be displayed on the key,
it will be omitted at the center with “.” and only the beginning and
ending of the link will be displayed.
Link To specify the link to the folder, enter the link manually, or browse to
the desired folder. The link must be registered. Up to 128 characters
can be entered.
User Name Register a user name when it is required to access the folder. Up to
64 characters can be entered.
Password Register a password when it is required to access the folder. Up to
28 characters can be entered.
Automatic Network Login You can set whether to perform a user login when using shortcuts.
This section describes the procedure for registering folder shortcuts. When editing, select
the folder shortcut you want to edit in step 4, and press [Edit]. Select the item you want
to edit.
Press <Setting>.
1
Press the [Register] tab.
2
Press [Folder Shortcut].
3
To Next Page
Loading...
Need help?
General
