1
2
3
4
5
6
7
Device Settings
Specifying Default Settings 7-35
Select [Default Settings] or [Other Settings].
4
In this example, [Default Settings] is selected.•
For details on the settings that can be specified, refer to “• List of Default Scanner Settings” (see
page 7-36) and “List of Other Settings” (see page 7-37).
Select the function to set.
5
In this example, [Contrast] is selected.
Select the default value, and press [Enter].
6
Press [Close].
7
To continue to change other default values, repeat steps 3 to 6 of the operation.
To Next Page
Loading...
Need help?
General
