7-42 Specifying Default Settings
Select the function to set.
5
In this example, [Resolution] is selected.
Select the default value, and press [Enter].
6
Press [Close].
7
To continue to change other default values, repeat steps 4 to 7 of the operation.
îš„
List of Default Transmission Settings
Function Description Settings
Reference
page
Preview Set the default preview setting. ON
OFF
4-4
Resolution This sets the default resolution when a
document is scanned.
Normal
Fine
Super Fine
Photo
Background
3-21
Contrast
(Option)
This sets the default contrast when a
document is scanned.
Lightest
Lighter
Normal
Darker
Darkest
3-23
Stamp
*1
You can stamp a document that has been
scanned (or transmitted) using the ADF and
check it has been scanned (or transmitted).
ON
OFF
4-10
Next Document
Setting
You can scan a series of separate documents
and transmit them as a single document.
ADF: ON
OFF
FBS: ON
OFF
4-7
TTI The sender name printed at the top of a
document received at the destination.
ON
OFF
4-12
Cover Page A cover page containing a simple message
can be attached to the documents.
ON
OFF
4-13
Tx Report The transmission result is printed. Or can be
checked via e-mail.
OFF
Print
e-mail
6-2
To Next Page
Loading...
Need help?
General
