1
Basic Scan Functions
Basic Scan Settings 1-23
Press [Color].
2
Scan format switches between “Mono” and “Color” each time you press [Color].•
If [Color] is not displayed, press the [Advanced] tab and then select [Color].•
Specify the destination, and press <Start>.
3
For details on the procedure, refer to “• Basic Scanning”. (See page 1-2.)
If you loaded the document in the ADF, this concludes the procedure.•
If you loaded the document on the document glass, load the next document, and press •
[Next Doc]. To finish scanning, press [Complete].
To Next Page
Loading...
Need help?
General
