1
2
Advanced Scan Functions
Scanning Documents Using a TWAIN Box 2-47
Select the TWAIN box you want to register or edit the name or I.D. code for.
4
If an I.D. code is set for the TWAIN box, enter the I.D. code and press [Enter].
5
If no I.D. code is set, proceed to step 6.
To register or edit the name, press [Box Name].
6
If you do not want to register or edit the name, proceed to step 8.
Register or edit the name, and press [Enter].
7
Up to 16 characters can be entered.•
For details on entering characters, refer to Chapter 1, “Entering Characters” in the •
Administrator’s Guide.
To Next Page
Loading...
Need help?
General
