2-50 Scanning Documents Using a TWAIN Box
Item Description
File Number Displays the file number automatically assigned at the machine.
Date/Time Displays the date and time that the document was stored in the TWAIN
box.
Pages Displays the number of pages for the stored document.
B/W / Color Displays whether the image was scanned with the monochrome or color
scan format.
Preview Select [Preview] to display the scanned document.
Page range Enables you to set which page to load when a file has multiple pages.
Erase
document(s)
Select [Delete after download] to automatically delete the documents
from the TWAIN box after downloading them.
Download Starts downloading the stored document.
Select MFP Used to change the scanner to connect to when the IP address of the
machine has changed, etc.
This is for network scanning only.
Refresh Updates the list of files.
Save Saves the current settings.
This cannot be clicked unless the settings have been changed.
Default Returns the settings to the factory defaults.
Exit Closes Muratec MFX-25xx NW Scan.
Resolution,
Pixel type,
Fixed image size
These settings may be required, depending on the application software.
Set them as required.
(Normally it is not necessary to change these settings from their default
values.)
[Information] tab Displays the version information for Muratec MFX-25xx NW Scan.
Select the document to load, and click [Download].
6
If you connected the computer and the machine with a USB cable, confirm that the
machine is not in energy save mode such as the low power mode or the sleep mode. If
the machine is in energy save mode, you cannot retrieve data. Press <Energy Save> to
disable the energy save mode.
To Next Page
Loading...
Need help?
General
