Muton XPJ-1641SR - Menu 5: System Info; Menu 6: Sleep Mode; Sleep Mode 1: Cleaning Setting

Sleep Mode 1: Cleaning Setting 101
4 Menu 5: System Info.
4 Menu 6: Sleep Mode
Displays the versions of the firmware and total printed area.
Displays the versions of the firmware of
the main side (M) and controller side (C).
Displays total printed area in the printer since
the purchase.
This information may be used for reference for
maintenance.
Start Sleep Mode and set the head cleaning interval during Sleep Mode.
Submenu
Sleep Mode 1: Cleaning Setting
Sleep Mode 2: Start
Sleep Mode 1: Cleaning Setting
Set the timer to perform the head cleaning while in sleep mode.
Setting values
<Short> / Normal / Long
<> indicates the initial value.
Tap [Enter] to confirm the setting and the
display goes to the Cleaning Timer setting.
1 / 2 / 3 / 4 / 5 / <6> / 9 / 12 / 18 / 24h
<> indicates the initial value.
Menu 5 : System Info.
Menu 5
System Info.
Version
Ver. M / C 0.00 / 0.00
TotalPrintArea
  42949672ｍ２
Menu 6 : Sleep Mode
Menu 6
Sleep Mode
Sleep Mode 1
Cleaning Setting
Sleep Mode 2
Start
Sleep Mode 1
Cleaning Setting
Cleaning Type:
Short
Cleaning Timer:
(1 - 24) 6 h