Muton XPJ-1641SR - Setup 15: Auto Cleaning

Setup 15: Auto Cleaning 83
When the cleaning type is set to other than Off
Setup 15: Auto Cleaning
Configure the settings for the auto cleaning operation.
Submenus
Standby Mode menu
While Printing menu
Before Print menu
Standby Mode menu
Choose the auto cleaning mode and timer to be performed while in standby
mode.
Setting values
Off / Short / <Normal> / Long
<> indicates the initial value.
If the cleaning type is set to Short, Normal, or Long, the display goes to the Cleaning
Interval setting to set the timer for auto cleaning while in standby mode.
Setting values
10 min to <360 min> to 1,440 min
<> indicates the initial value.
Setup 15
Auto Cleaning
Auto Cleaning 1
Standby Mode
Auto Cleaning 2
While Printing
Auto Cleaning 3
Before Print
Auto Cleaning 1
Standby Mode
Cleaning Type:
Normal
Cleaning Type:
Short
Cleaning Interval:
(10 - 1440) 360 min