102 Sleep Mode 2: Start
Sleep Mode 2: Start
Put the printer into sleep mode.
• Tap .
• “Sleep Mode Start -> Enter” is displayed.
Tap [Enter].
• “In Sleep Mode Wake up -> Enter” is displayed.
The sleep mode will start.
• To exit the sleep mode, tap [Enter].
Important!
During Sleep Mode, even if the set amount of time has passed, print-head cleaning is not performed under the following
circumstances.
• When the front cover is open.
• When the maintenance cover is open.
• The pressure rollers is released.
• The waste ink tank is full.
• The ink bag case has been removed.
• The S/C card has been removed.
• The inserted S/C card is not the genuine S/C card, etc.
If one of the above conditions occurs during Head cleaning, cleaning is stopped.
When the printer returns to a normal state, Head cleaning is restarted.
To Next Page
Loading...
