130 Replacing absorption material for the flushing box
3 Replacing consumable parts
The flushing box is a part that keeps receiving ink discharged from the print head. Please replace the absorption material for the
flushing box periodically. If used without replacing, it can cause damage to the print head.
Replacing period:
• Approx. every two months (since it differs depending on usage frequency, please check periodically)
Preparation:
• Absorption material for the flushing box
• Paper you can get dirty (paper which ink will not bleed through)
Replacing absorption material for the flushing box
1. Checking steps
[1]
Open the front cover.
[2]
Open the maintenance cover on the right side.
[3]
Check the absorption material for the flushing box.
• When there are lumps of ink rise from the frame of the flushing box, it is
time to replace.
[4]
Close the maintenance cover.
[5]
Close the front cover.
Replacing consumable parts
To Next Page
Loading...
