Muton XPJ-1641SR - Menu 1: Setup; Setup 1: User Type

60 Setup 1: User Type
4Menu 1: Setup
Setup 1: User Type
You can have up to 15 groups of User Type, labeled “Type1” to “Type15”. When
you select a User Type group (“Type”) and tap [Enter], that definition group will
be set for the printer. Also, a submenu will be displayed.
Setting values
Select a “Type” number, from “Type1” to
“Type15”.
Important!
When you change to another User Type, all the settings that can be set via the User Type will be changed.
• The settings that can be set via the User Type include “Print Mode”, “Effect” the adjustment value for “Adjust Print”, “PF
Adjust”, the setting value for “Pre Heater”, “Platen Heater”, “Dryer”, “Vacuum Fan” and “Thickness”.
When using the printer for the first time or using a new roll media, configure a user type settings.
Making media settings.
Submenus
**>1: Print Mode
**>2: Adjust Print>
**>3: PF Adjust
**>4: Pre Heater
**>5: Platen Heater
**>6: Dryer
**>7: Vacuum Fan
**>8: Thickness
Menu 1: Setup
Setup1
User Type
User Type:
Type 1
User Type:
Type 1
Type ** : 1
Print Mode
Type ** : 2
Adjust Print
Type ** : 3
PF Adjust
Type ** : 4
Pre Heater
Type ** : 5
Platen Heater
Type ** : 6
Dryer
Type ** : 7
Vacuum Fan
Type ** : 8
Thickness