82 Menu 2: Cleaning
Setup 12: Multi Strike
Sets up the overwrite count per line.
Use or to enter the value, and tap [Enter].
Setting values
<1 cnt> to 9 cnt
<> indicates the initial value.
Setup 13: Strike Wait
Sets up the waiting time while overwrite printing.
Use or to enter the value, and tap [Enter].
Setting values
<0.0 sec> to 5.0 sec
<> indicates the initial value.
Setup 14: Slant Check
Sets up slanting detection during media loading.
Setting values
Slant Check is not performed.
This is the initially set value.
Slant Check is performed.
Multi Strike:
(1 - 9) 1 cnt
Strike Wait:
(0.0 - 5.0) 0.0 sec
To Next Page
Loading...