EasyManua.ls Logo

Muton XPJ-1641SR - Page 147

Muton XPJ-1641SR
166 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Status messages 147
User: Type ** OK? Initializing the media.
Please wait a while.
(** represents the set User type.)
Media Initial
Move To
Origin Position
The print head is moving to the print start position to check the print origin
Please wait a while.
Confirm Position
End -> Enter
The print head has moved to the print start position. If it shows the intended
position, tap [Enter].
Power Off Turning OFF the printer. Wait for a while.
Insert Ink Bags Charging the ink. Insert ink bag cases.
Insert Cleaning Bags Washing Print head. Install cleaning bags.
Remove Bags Washing Print head or discharging ink.
Remove ink bag cases.
S/C Reading Reading the S/C card.
*** Remote Mode ***
End -> Enter
The remote panel mode is running, via MSM or similar. In the remote panel
mode, operations via the front panel are not possible. To terminate the
remote panel mode, press the [Cancel] key for more than two seconds.
Roll Remain Error The remaining roll paper count has become 0. (Printing stops)
Roll Near End: *m The remaining roll paper count is almost 0. The remaining roll paper is *m.
Color: * color Choose the ink configuration you want to use.
Life Times [Pump] The operational life of the pump motor has almost expired.
(Continues operation)
Contact your local MUTOH dealer.
Life Times [CR Motor] The operation life CR motor has almost expired.
(Continues operation)
Contact your local MUTOH dealer.
Life Times [PF Motor] The operational life of the PF motor has almost expired.
(Continues operation)
Contact your local MUTOH dealer.
Display Description

Table of Contents

Related product manuals