Canceling or reducing pressure rollers individually 43
[3]
Push down the tab on the slider lock lever, then slide it to the front.
• To reduce pressure, slide it to front until it clicks.
• To cancel the pressure roller, fully slide it to the front until it clicks into place.
First, try to reduce or cancel the rollers on both edges of the media. It the problem persists, reduce or cancel more rollers.
[4]
(To cancel the individual pressure rollers) Push the media feed lever
back to the original position to lock the pressure rollers.
[5]
Close the front cover.
[6]
Perform media feed adjustment.
"Media feed adjustment" P. 38
To Next Page
Loading...
