4.1.24 Connecting a Sereial Device 4-39
4.2 Connecting GT30 with PLC 4-40
4.2.1 Connecting to the FPΣ 4-40
4.2.2 Connecting to the FP0 4-42
4.2.3 Connecting to the FP1 4-44
4.2.4 Connecting to the FP2/FP2SH 4-45
4.2.5 Connecting to the FP2/FP2SH Computer Communication Unit 4-47
4.2.6 Connecting to the FP10SH 4-48
4.2.7 Connecting to the FP10SH/FP3 Computer Communication Unit 4-50
4.2.8 Connecting to the FP-M 4-51
4.2.9 Atutomatic Communication Settings Function 4-53
4.2.10 Through Function 4-54
4.2.11 Connecitng a PLC by Mitsubishi Electric Corporation 4-55
4.2.12 Connecting PLCs by Omron Corporation 4-56
4.2.13 Connecting a PLC by Yokogawa Electric Corporation 4-62
5 GT Configuration Settings 5-1
5.1 GT Configuration Settings 5-2
5.2 Entering Configuration Settings from GTWIN Screen Creation Tool 5-3
5.2.1 GT Configuration Settings: “Basic Setup” 5-3
5.2.2 GT Configuration Settings: “Communication Parameters” 5-6
5.2.3 GT Configuration Settings: “Auto-Paging” 5-8
5.2.4 GT Configuration Settings: “Startup Screen Settings” 5-9
5.2.5 GT Configuration Settings: “Setup” (For GT01) 5-10
5.2.6 GT Configuration Settings: “Setup” (For GT11) 5-12
5.2.7 GT Configuration Settings: “Setup” (For GT30) 5-15
5.2.8 GT Configuration Settings: “Hold Device Value” 5-18
5.3 Entering Configuration Settings from the GT01 and GT11 Main Unit 5-20
5.3.1 Bringing Up the System Menu 5-20
5.3.2 Setting Mode: “Communication Parameters” (COM. Port / TOOL Port) 5-21
5.3.3 Setting Mode: “Liquid Crystal Display Contrast Adjustment” (Contrast) 5-23
5.3.4 Setting Mode: “Memory Initialization” (Clear Memory) 5-24
5.3.5 Setting Mode: “Touch Switch Adjustment” (T. SW) 5-25
5.3.6 Setting Mode: “Self-Diagnosis” (Test Mode) 5-26
5.3.7 Inhibiting the System Menu Display 5-27
5.4 Entering Configuration Settings from the GT30 Main Unit 5-28
5.4.1 Bringing Up the System Menu 5-28
5.4.2 Setting Mode: “Liquid Crystal Display Contrast Adjustment” (Contrast) 5-29
5.4.3 Setting Mode: “Clock Settings” (Clock) 5-30
5.4.4 Setting Mode: “Communication Parameters” (TOOL Port / COM. Port) 5-31
5.4.5 Setting Mode: “Memory Initialization” (Clear Memory) 5-33
5.4.6 Setting Mode: “Self-Diagnosis” (Test Menu) 5-34
5.4.7 Inhibiting the System Menu Display 5-35
To Next Page
Loading...
Need help?
General
