Native Instruments Maschine Reference Manual

MASCHINE 1.5 Reference Manual – 139
Type
modE
Here you can select between four different lter-types:
notCh, hp (highpass), Bp (bandpass), and lp (lowpass).
Depending on the lter type, the following parameters vary
as indicated.
Freq
CUt
CUt stands for Cutoff Frequency and is available with all
lter-types.
rES
Res controls the amount of Resonance - the amount of am-
plication around the cutoff frequency. It is not available
with lter-type Notch.
Modulation
amoUnt
This denes how much the Filter gets modulated by the
modulation source.
SoUrCE
Here you can select between three different modulation
sources: EnvElopE, lFo SynC and lFo. Depending on your
choice for the modulation source, the following parameters
appear to the right:
EnvElopE dECay With Decay you adjust how fast the envelope fades out.
Smooth Smooths the shape of the EnvElopE.
ShapE Change the Shape of the envelope here.
lFo SynC SpEEd
Denes the speed of the modulation in musical values
from 16/1 (once every 16 bars) up to 1/32 note.
ShapE Change the shape of the LFO waveform here.
phaSE Adjusts the start phase of the LFO.
lFo SpEEd
Denes the speed of the modulation in Hz (Hertz) ranging
from 0.03 Hz up to 16 Hz.
ShapE Change the shape of the LFO waveform here.

Native Instruments Maschine Specifications

General

Weight	4.85 lbs (2.2 kg)
Pads	16 velocity-sensitive pads with aftertouch
Connectivity	USB, MIDI In/Out
Software	Maschine Software
Compatibility	Mac and PC
Power Supply	USB powered
Audio Interface	No built-in audio interface
Sequencer	Yes, pattern-based sequencer
Sampling	Yes, integrated sampler
Effects	Yes, includes a variety of effects
Encoders	8 knobs with LED ring indicators
DAW Integration	Yes, works as a plugin within most major DAWs