Native Instruments Maschine Reference Manual

MASCHINE 1.5 Reference Manual – 140
8.2.2 EQ
The EQ on the hardware
Use the EQ to boost or cut selective frequencies of the audio signal. The EQ is mainly a tool
to tailor your audio signal to taste by cutting out selected frequencies or boosting others, but
can also be used quite efciently as a DJ-style cut-and-boost effect. Note that the parameters
cover two pages.
Page 1
Low Band
FrEQ
Frequency selector for the Low Band. Ranges from 20 Hz
to 8 kHz.
GaIn Gain Control for the Low Band.
Mid Band 1
FrEQ
Frequency selector for the Mid Band 1. Ranges from 40 Hz
to 16 kHz.
GaIn Gain Control for the Mid Band 1.
Mid Band 2
FrEQ
Frequency selector for the Mid Band 2. Ranges from 40
Hz to 16 kHz.
GaIn Gain Control for the Mid Band 2.
High Band
FrEQ
Frequency selector for the High Band. Ranges from 50 Hz
to 20 kHz.
GaIn Gain Control for the High Band.

Native Instruments Maschine Specifications

General

Weight	4.85 lbs (2.2 kg)
Pads	16 velocity-sensitive pads with aftertouch
Connectivity	USB, MIDI In/Out
Software	Maschine Software
Compatibility	Mac and PC
Power Supply	USB powered
Audio Interface	No built-in audio interface
Sequencer	Yes, pattern-based sequencer
Sampling	Yes, integrated sampler
Effects	Yes, includes a variety of effects
Encoders	8 knobs with LED ring indicators
DAW Integration	Yes, works as a plugin within most major DAWs