Section 3: Features
96 ◆ Section 3: Features DS1000/2000 Product Description
When multiple calls ring an extension simultaneously, the system services the ringing calls in the
following order:
1. ICM Key
2. Line Key (from lowest to highest)
3. Loop Key (from lowest to highest)
Prime Line vs. Ringing Line Preference
Ringing Line Preference has priority over Prime Line. For example, an extension with Ringing
Line Preference will answer a ringing trunk, not get dial tone on their Prime Line. In addition, a
Ringing Prime Line will have priority over any other ringing trunk. The seize priority is as follows:
● Ringing Prime Line
● Ringing non-Prime Line
● Prime Line
Feature Quick Steps
To use Ringing Line Preference:
1. Lift handset or press SPK.
To bypass Ringing Line Preference:
1. Before lifting the handset or pressing SPK, press ICM, a Line key or a Programmable Func-
tion Key.
User Programmable Feature: # R L P
Enables or disables Ringing Line Preference.
Save Number Dialed
Availability: All versions.
Save Number Dialed permits an extension user to save their last
outside number and easily redial it later on. For example, an
extension user can recall a busy or unanswered number without
manually dialing the digits. The system retains the saved number
until the user stores a new one in its place.
Group Ring (page 66) Yes Yes N/A N/A
Extension Hunting (page 61)
(Call to UCD master)
Yes Yes No No
Call Coverage Keys (page 34) No No No No
Group Call Pickup (page 65) No No No No
Table 3: Ringing Line Preference for Headset Calls (Continued)
Feature
Keyset Attendant
RLP = Y RLP = N RLP = Y RLP = N
Does pressing SPK while in the Headset mode
answer the ringing call?
Save the number you just
dialed for quick redialing.
To Next Page
Loading...
Need help?
General
