Section 3: Features
DS1000/2000 Product Description Section 3: Features â—† 105
3
System Timers, Stations
Availability: All versions.
The system provides many station timers that the administrator
can customize. Review the tables below for a description of each
station timer.
Force Program Exit
If a telephone in the programming mode is inactive longer than
this interval, the system automatically cancels the programming
mode and makes the telephone idle.
Table 5: Station Timers
Option Description
Hold Recall
Use this timer to set how long a call stays on Hold before it
recalls the extension that initially placed it on Hold.
Exclusive Hold Recall
Use this timer to set how long a call stays on Exclusive Hold before
it recalls the extension that initially placed it on Exclusive Hold.
Camp-On
Not used.
Call Forward Ring No
Answer
When Call Forwarding Ring No Answer is enabled, this timer
sets how long a forwarded call rings an unanswered extension
before routing to the forwarding destination.
In addition, use this timer to set how long a transferred call rings
a busy non-operator extension before recalling the extension
from which it was initially transferred.
This timer also sets how long a call will ring an idle UCD Hunting
group member before cycling to the next member of the group.
Call Waiting Tone Interval
Use this timer to set the interval between Call Waiting tones.
Also use this timer to set the interval between Off-Hook Signal-
ing alert tones.
Call Coverage Delay
For extensions with Delayed Ringing Call Coverage keys, this
timer sets how long a call flashes the key at an extension before
it starts to ring.
Hook Flash Transfer
Not used.
Hook Flash Disconnect
Not used.
Number of Extended
Rings
If an extension’s Class of Service enables Extended Ringing, use
the timer to set the duration of the Extended Ringing.
Option Description
Adjustable station timers
allow the system to more
precisely meet the site
requirements.
To Next Page
Loading...
Need help?
General
