To Next Page

To Previous Page

Section 3: Features

28 ◆ Section 3: Features DS1000/2000 Product Description

Veriﬁed Account Codes

With Veriﬁed Account Codes, the system compares the Account Code the user dials with a list of

codes programmed into the Veriﬁed Account Code Table. If the Account Code is in the table, the

call goes through (provided it is not prevented by an extension’s Toll Restriction programming). If

the code is not in the table, the system prevents the call. Veriﬁed Account Codes, if enabled, apply

only to Forced Account Codes.

Using Account Codes and Speed Dial

To simplify Account Code operation, Personal and System Speed Dial bins can contain Account Codes.

Using Account Codes with Last Number Redial and Save

Last Number Redial and Save do not store Account Codes. This means that the user must manually

enter an Account Code to have it included with a call dialed using Last Number Redial and Save. If

Forced Account Codes are enabled, the system requires the user to enter the Account Code before it

outdials the stored number saved by Last Number Redial or Save.

An extension user can preselect a trunk for a Last Number Redial or Saved call.

Account Codes and Emergency Calls

Account Codes are never enforced for emergency (911 and 1+911) calls.

DSS Console Account Code Key

A keyset user can have an Account Code key on their DSS Console. It works the same as a keyset

Account Code key with the following exceptions:

● The DSS Console key ﬂashes quickly red while the user is entering their Account Code. (The

keyset Account Code key ﬂashes quickly green.)

● The DSS Console key lights red while the user is on a call for which they have entered an

Account Code. (The keyset Account Code key lights green.)

Feature Quick Steps

To enter an Optional (Unforced) Account Code:

1. Place or answer outside call + Press Account Code key, soft key, or dial # (if enabled).

2. Enter Account Code + Press Account Code key, soft key, or dial # (if enabled).

3. (Outgoing calls only) Dial outside number.

To enter a Forced Account Code:

1. Access line for outside call + Listen for 3 beeps + enter Account Code

2. Press Account Code key, soft key, or dial # (if enabled) + Dial outside number.

NEC DS1000 Product Description

Other manuals for NEC DS1000