Section 3: Features
DS1000/2000 Product Description Section 3: Features ◆ 41
3
Feature Quick Steps
To cancel the Caller ID display and return your phone to its normal display:
1. Press CLEAR.
To turn the Caller ID display back on (after you press CLEAR to cancel it):
1. Press CHECK.
To display the Caller ID data for the third party’s call (i.e., use Third Party Caller ID Check):
1. Press ICM + CHECK.
2. Press the key for the call you want to check.
You can press a line key, loop key, Hotline key or Call Coverage key:
- Press a line key while the call is ringing or connected to the third party.
- Press a loop key while the call is ringing the third party.
- Press a Hotline key while the call is connected to the third party.
- Press a Call Coverage Key while the call is ringing the third party.
3. Hang up when you are done.
To redial a logged call:
1. At a Super Display Telephone:
Press CALLS + VIEW ALL + Scroll to record + CALLBACK.
At a 22- or 34-Button Telephone:
Press CL + ALL + Scroll to record + CLEAR + CALL.
Central Office Calls, Answering
Availability: All versions.
The system provides flexible routing of incoming CO (trunk)
calls to meet the exact site requirements.
Answering Priority
When multiple calls ring an extension simultaneously, the system services the ringing calls in the
following order:
1. ICM Key
2. Line Key (from lowest to highest)
3. Loop Key (from lowest to highest)
Overflow
Refer to Overflow for Key Ring Calls on page 73 for details on the overflow options.
Feature Quick Steps
To answer an incoming trunk call:
1. Lift handset.
If you have Ringing Line Preference, lifting the handset answers the call.
2. Press flashing line or loop key.
The system allows trunk
calls to ring and be
answered at any
combination of system
extensions.
To Next Page
Loading...
Need help?
General
