NEC DS1000 Product Description

Section 3: Features
DS1000/2000 Product Description Section 3: Features ◆ 49
3
Dial Number Preview
Availability: All versions.
Dialing Number Preview lets a display keyset user dial and
review a number before the system dials it out.
Feature Quick Steps
To dial using Dial Number Preview:
1. Do not lift the handset, or press SPK or press ICM + Dial *.
2. Dial the number you want to call + Press line key to dial previewed number.
To correct the displayed digits before dialing them out:
1. Use VOL ▲ and VOL ▼ until the cursor replaces the digit you want to change.
VOL ▲ moves the cursor to the left. VOL ▼ moves the cursor to the right.
2. Dial the digit that you want to replace the cursor.
3. Press VOL ▲ and VOL ▼ to place the cursor over any other digits you want to edit.
OR
Press VOL ▼ until the entire number displays to the left of the cursor.
The system will only dial the digits to the left of the cursor.
4. Press a line key.
Dial Tone Detection
Availability: All versions.
The system can optionally detect precise CO dial tone for auto-
matically dialed trunk calls (such as Speed Dial and Auto Redial
calls). With Dial Tone Detection enabled for a trunk, the system
will monitor the trunk when initially seized for valid dial tone or
stutter dial tone. If valid EIA/TIA dial tone is detected, the system outdials the call on the trunk. If
dial tone is not detected within 2 seconds, the system will try the next available trunk in the same
trunk group to which the initial trunk belongs. If another trunk in the group is not available, the user
hears busy tone. Dial Tone Detection does not apply to manually dialed trunk calls. If Dial Tone
Detection is disabled, the system waits 500mS after trunk seizure and then outdials the number.
If enabled, Dial Tone Detection applies to the following types of trunk calls:
● Auto Redial (initial trunk seizure)
● Caller ID (callbacks)
● Last Number Redial
● Call Forwarding Off Premise
● Save
● Speed Dial
Dial Number Preview helps
the user avoid dialing
errors.
You can set up the system to
detect CO (outside line) dial
tone.

NEC DS1000 Specifications

General

Brand	NEC
Model	DS1000
Category	Telephone
Language	English