NEC DS1000 Product Description

Section 3: Features
104 ◆ Section 3: Features DS1000/2000 Product Description
Transfer Recall
Use this timer to set how long a transferred call rings an idle des-
tination extension or Ring Group before recalling the extension
from which it was initially transferred.
In addition, use this timer to set how long a transferred call rings
a busy operator extension before recalling the extension from
which it was initially transferred.
Intercom Inter-digit
When an extension user places a call, they must dial each suc-
ceeding digit within this interval.
Meet-Me Conference
When a user initiates a Meet-Me Conference, the system waits
this interval for the Paged party to join the call.
Dialing Pause
For Speed Dial, the system waits this interval when it encounters
a pause in a Speed Dial bin.
Page Duration
Use this timer to set the maximum length of Page announcements.
Door Unlock
(DS1000 only) When a single line (2500 type) user hookflashes
while talking to a visitor at a Door Box, the Door Box strike
opens for this interval.
DIL No Answer
This timer sets how long a DIL to an extension rings before Key
Ring or overflow occurs. Key Ring rings all extensions pro-
grammed to ring for that line.
Trunk Revert
This timer sets how long Hold Recall rings the extension that
placed the call on hold before Key Ring occurs. Key Ring rings
all extensions programmed to ring for that line.
This timer also sets how long a DIL to a Ring Group master
number rings before Key Ring or overflow occurs. Key Ring
rings all extensions programmed to ring for that line.
In addition, this timer sets how long a Transfer Recall rings the
extension that initially transferred the call before Key Ring occurs.
Trunk Delay Ring
Use this timer to set how long the system waits before ringing an
extension that has the Delayed Ringing option enabled.
Trunk Overflow
Not used.
Centrex Type Feature
Key Delay
This timer sets how long the system waits when it finds a Cen-
trex delay (i.e., D) programmed in a Centrex Feature Key.
ACD/UCD Overflow
This timer sets when UCD overflow occurs. When all UCD
agents are busy, a queued call rings for this interval and then
overflows to the UCD Overflow destination.
Number of Password
Attempts
Use this option to set how many times the system allows a user
to enter the incorrect programming password before locking
them out.
Program Lockout Time
Not used.
Option Description

NEC DS1000 Specifications

General

Brand	NEC
Model	DS1000
Category	Telephone
Language	English