5. RAID System Configuration
Express5800/T110f-S, R110f-1E, T110f-E Maintenance Guide
112
Chapter 2 Useful Features
7. Press <Esc> key to return to the TOP menu screen, and then exit the LSI Software RAID Configuration
Utility.
Note
• To cancel the hot spare setting, choose Objects and then Physical Drive from
the TOP menu. Move the cursor to the hard disk drive to cancel the hot spare
setting, press <Enter> key, and then select Change Drv State.
• If two or more hard disk drives with the same capacity are assigned as a hot
spare drive, rebuilding is executed from the drive that has a smaller port number.
ONLINE A00-00
ONLINE A00-01
PORT #
0
1
Objects – PHYSICAL DRIVES SELECTION MENU
HOTSP
2
To Next Page
Loading...
