2. BMC Configuration
Express5800/T110f-S, R110f-1E, T110f-E Maintenance Guide
87
Chapter 2 Useful Features
2.3.1
Network
The Network menu appears when you select Network on the BMC Configuration menu.
Network menu
The table below shows details of parameters and their default value.
(1/2)
Item Description Default Value
Property
Management LAN Specify and display LAN port to communicate with BMC. *1 *2
Management LAN
: LAN port for BMC exclusive use.
Shared BMC LAN
: LAN port of System (OS) is shared and used.
Management LAN
Connection Type Specify and display the connection type of BMC LAN.*1
Auto Negotiation
: Connecting by suitable setting.
100Mbps Full
: Connecting by Full Duplex at speed of 100 Mbps.
100Mbps Half
: Connecting by Half Duplex at speed of 100 Mbps.
10Mbps Full
: Connecting by Full Duplex at speed of 10 Mbps.
10Mbps Half
: Connecting by Half Duplex at speed of 10 Mbps.
Auto Negotiation
BMC MAC Address MAC Address of BMC is displayed.
−
DHCP Determine whether to dynamically obtain an IP address from a DHCP server. If
the item is set to Enable and applied, BMC set the value obtained from DHCP
server on "IP Address", "Subnet Mask" and "Default Gateway".
Disable
IP Address Specify the BMC LAN IP address. *4 192.168.1.1
Subnet Mask Specify the Subnet Mask of BMC LAN. *3 *4 255.255.255.0
Default Gateway Specify the Default Gateway IP address of the BMC LAN. *4
If you set this item, it is necessary for applying configuration information that
the gateway is connected on network.
0.0.0.0
Dynamic DNS Determine whether to enable/disable of Dynamic DNS. *5 Disable
DNS Server Specify the DNS Server. 0.0.0.0
Host Name Specify the Host Name. *6 Blank
Domain Name Specify the Domain Name. *7 Blank
To Next Page
Loading...
Need help?
General