6. Windows System Recovery
Express5800/T110f-S, R110f-1E, T110f-E Maintenance Guide
40
Chapter 1 Maintenance
6.
Windows System Recovery
Recover the Windows system by using the following instructions if the system does not work correctly.
Note
• After recovering the system, be sure to install each driver and Starter Pack.
See "Installation Guide (Windows)" to install Starter Pack and device drivers.
• If hard disk drives cannot be detected, you cannot recover the Windows system.
• Create the OEM drivers to removable media depending on the server
configuration.
6.1
Recovery of Windows Server 2012
If the Windows does not start correctly, you can recover it using the feature of the Windows installation disc.
To run this feature, start the installation disc, and then choose Repair your computer in Windows Setup
wizard.
We recommend that this option is performed by the system administrator.
To install the OEM drivers, copy the files under the following folder in EXPRESSBUILDER to removable
media.
Windows Server 2012: \001\win\winnt\oemfd\ws2012
6.2
Recovery of Windows Server 2008 R2 and Windows Server 2008
If the Windows does not start correctly, you can recover it using the system recovery option.
We recommend that this option is performed by the system administrator. For details, refer to Windows Help.
To install the OEM drivers, copy the files under the following folder in EXPRESSBUILDER to removable
media.
• Windows Server 2008 R2: \001\win\winnt\oemfd\ws2008r2
• Windows Server 2008 32-bit Edition: \001\win\winnt\oemfd\ws2008
To Next Page
Loading...
Need help?
General