1. Transfer, Movement, and Disposal
Express5800/T110f-S, R110f-1E, T110f-E Maintenance Guide
14
Chapter 1 Maintenance
1.
Transfer, Movement, and Disposal
1.1
Transfer to a Third Party
Note the following precautions when you transfer (or sell) the server to a third party.
• Server
When transferring (or selling) the server to a third party, be sure to provide this manual (including electronic
data) to the third party.
• Data on the hard disk drive
Be sure to erase hard disk drive data to prevent the leakage of sensitive data (such as customer information
or company management information) to any third parties.
Important
NEC assumes no liability for data leakage.
Data seems to be erased when you empty "Recycle Bin" of Windows or run the "format" command of the
operating system. However, the actual data remains on the hard disk drive. Data not erased completely
might be restored by special software and used for unexpected purposes.
• Bundled software
Note the following precautions when transferring (selling) the provided software to a third party.
− Transfer them with the server.
− All provided media and documents must be transferred and no backup copies must be retained.
− Transfer requirements listed in "Software License Agreement" that comes with each software must be
satisfied.
− Software on client PC must be uninstalled before transferring.
To Next Page
Loading...
Need help?
General