6. Details of EXPRESSBUILDER
Express5800/T110f-S, R110f-1E, T110f-E Maintenance Guide
120
Chapter 2 Useful Features
6.2
Menus of EXPRESSBUILDER
You can operate EXPRESSBUILDER using onscreen menus.
(1) Boot Selection Menu
When EXPRESSBUILDER starts from disc or Internal Flash Memory, the menu below appears.
Tool menu (Redirection mode)
Tool menu (Normal mode)
OS installation *** default ***
Boot selection
Use the upper and lower arrow keys to move the cursor, and then press <Enter> key to choose it.
OS installation is selected if no key is pressed.
Home Menu shown in (2) Home Menu appears when choosing OS installation.
Tool Menu shown in (3) Tool Menu appears when choosing Tool menu (Normal mode). The screen appears
on the display. Choose this mode usually.
You can operate EXPRESSBUILDER remotely by using BIOS Console Redirection when choosing Tool menu
(Redirection mode). The menu items and the tools are the same as the normal mode.
Tips
Choose the normal mode when using the remote KVM feature.
To Next Page
Loading...
Need help?
General