2. BMC Configuration
Express5800/T110f-S, R110f-1E, T110f-E Maintenance Guide
97
Chapter 2 Useful Features
2.3.7
Miscellaneous
The Miscellaneous menu appears when you select Miscellaneous on the BMC Configuration menu.
Item Description Default Value
Miscellaneous
Behavior when SEL
repository is Full
Specify the behavior when SEL repository is full. *1
Stop logging SEL
: SEL is not recorded any more.
Clear all SEL
: Delete all SEL and record SEL newly.
Overwrite oldest SEL
: Old SEL is overwritten with new SEL.
Stop logging SEL
Platform Event Filter Enable or disable Platform Event Filter. *2 Enable
Management
Software
Setting for remote management.
−
ESMPRO
Management
Enable or disable NEC ESMPRO Management. *3 Enable
Authentication Key Specify the Authentication Key. *4 *5 guest
Redirection Enable or disable Redirection feature. *4 *6 Enable
*1: When this item is changed to/from "Overwrite oldest SEL", all log records in the SEL Repository are cleared.
*2: Disabling Platform Event Filter also disables SNMP alert.
*3: When BMC can be managed directly from NEC ESMPRO Manager (Ver.5.4 or later), this item must be set to "Enable". If it is
set to "Enable", Authentication Key is required.
*4: Can be specified only when ESMPRO Management is set to "Enable".
*5: This Authentication key is used when NEC ESMPRO Manager (Ver.5.4 or later) manages the target server. Up to 16
alphanumeric characters are accepted.
*6: If Redirection is set to "Enable", Console Redirection Configuration port in BIOS is set to "Serial Port B" at next boot.
Note
If you do not use remote management feature by ESMPRO, set to "Disable" for
ESMPRO Management in Management Software. In this case, settings for relevant
items are hidden and unnecessary.
2.4
Clear BMC Configuration
If you select Clear BMC SEL on the main menu, the confirmation message below appears.
Confirmation message (Clear BMC SEL)
<ESC> key
: Aborts processing and returns to the main menu.
<Enter> key
: Clears SEL of BMC.
To Next Page
Loading...
Need help?
General