4. Collecting Failure Information
Express5800/T110f-S, R110f-1E, T110f-E Maintenance Guide
21
Chapter 1 Maintenance
4.
Collecting Failure Information
If the server does not work correctly, you can collect failure information by using the following way.
The failure information to be described is to be collected only at the request of your sales representative.
Important
When the system restarts after a failure has occurred, a message may appear
indicating virtual memory shortage. Ignore this message and proceed with
starting the system. Restarting the system may result in an inability to
properly dump the data.
4.1
Collecting Event Logs
To collect various event logs, follow the steps below.
Tips
If a STOP error, system error, or stall occurs, restart the system and follow the
steps below.
4.1.1
Windows Server 2012
1. Click Settings on the charm bar.
To go to step 5, you can directly choose Event Viewer on the menu that appears when you right click
on the lower left corner of the screen.
[Settings] [Event Viewer]
To Next Page
Loading...
Need help?
General