1. System BIOS
Express5800/T110f-S, R110f-1E, T110f-E Maintenance Guide
61
Chapter 2 Useful Features
(2) Memory Configuration submenu
On Advanced, choose Memory Configuration and then press <Enter> key to display the menu screen shown
below. For the menu that has on the left, move the cursor to it and then press <Enter> key to show its
submenus.
Option Parameter Description
Memory Information
− −
Hardware Memory Test
[Disabled]
Enabled
Specifies whether to perform a memory test.
Enabled : if an error is detected during the
test, the applicable memory resource will be
disabled.
Memory Retest
[No]
Yes
Yes : the memory error is cleared and all
DIMMs are tested on the next POST process.
This option is automatically changed to No
after starting the server.
Memory Frequency Limit
[Auto]
1066 MHz
1333 MHz
1600 MHz
Specifies the upper limit of the memory
frequency. The frequency may be lower than
the specified value depending on the memory
configuration.
Memory Voltage
1.5 V
[1.35 V]
Specifies the memory voltage.
This option is changed automatically for safe
operation, if necessary.
[ ]: Factory setting
To Next Page
Loading...
