NEC Express 5800 Series - Page 64

1. System BIOS
Express5800/T110f-S, R110f-1E, T110f-E Maintenance Guide
64
Chapter 2 Useful Features
(a) PCI Device Controller and Option ROM Settings
Option Parameter Description
VGA Controller
Disabled
[Enabled]
Enables or disables the onboard VGA
controller.
VGA Priority
[Offboard]
Onboard
Specifies the priority to expand ROM of the
VGA controller.
LAN Controller
Disabled
[Enabled]
Enables or disables the on-board LAN
controller.
LAN1 Option ROM Scan
Disabled
[Enabled]
Enables or disables the option ROM SCAN for
on-board LAN 1.
LAN2 Option ROM Scan
[Disabled]
Enabled
Enables or disables the option ROM SCAN for
on-board LAN 2.
PCI1 Slot Option ROM
PCI2 Slot Option ROM
PCI3 Slot Option ROM
PCI4 Slot Option ROM
(Express5800/T110f-S, T110f-E)
Disabled
[Enabled]
Enables or disables the option ROM on each
PCI board.
PCI1A Slot Option ROM
PCI1B Slot Option ROM
(Express5800/R110f-1E)
Disabled
[Enabled]
Enables or disables the option ROM on each
PCI board.
[ ]: Factory setting
Note
For a RAID controller, LAN adapter (network boot), or Fibre Channel controller, if
no hard disk drive on which an OS is installed is connected, set the option ROM for
that slot to Disabled.