1. System BIOS
Express5800/T110f-S, R110f-1E, T110f-E Maintenance Guide
82
Chapter 2 Useful Features
About boot order
(1) If a new bootable device is connected, the device is assigned into each BBS Priorities as the lowest priority
device.
(2) If a bootable device is disconnected from the server, the relevant device is removed from BBS Priorities.
(3) When Load Setup Defaults is executed on Save & Exit menu, the Boot Option and BBS Priorities are
changed as follows.
a) Boot Option Priorities
1. Boot Option #1: CD/DVD ROM Drive
2. Boot Option #2: Floppy Drive
3. Boot Option #3: Hard Drive
4. Boot Option #4: Network Device
b) BBS Priorites
-- Devices other than USB device : High
-- USB device : Next to non-USB devices
c) Bootable devices
If a bootable device has been set to Disabled, the Disabled status is canceled and it is
registered into BBS Priorities.
(4) If Remote Management Extended License (*) is registered, the remote media is added to bootable devices.
The remote media is assigned as follows:
-- The highest priority within "CD/DVD ROM Drive BBS Priorities" is assigned to AMI Remote CD/DVD
device.
-- When executing Load Setup Defaults in Save & Exit menu, the highest priority within "CD/DVD
ROM Drive BBS Priorities" is assigned to AMI Remote CD/DVD device.
(*) See EXPRESSSCOPE Engine 3 User's Guide for details of Remote Management Extended License.
To Next Page
Loading...
