2. BMC Configuration
Express5800/T110f-S, R110f-1E, T110f-E Maintenance Guide
90
Chapter 2 Useful Features
(2/2)
Item Description Default Value
LDAP
LDAP Authentication Enable or disable LDAP authentication. Disable
IP Address Specify the IP address. *9 0.0.0.0
Port Number Specify the LDAP port number. *9 636
Search Base Specify the search base used in LDAP authentication. *9 *10 Blank
Bind Domain Name Specify the bind domain used in LDAP authentication. *9 *10 Blank
Bind Password Specify the bind password used in LDAP authentication. *9 *11 Blank
*1: Can be specified if a user exists.
*2: Up to 15 characters including alphanumeric, hyphen (-), and underscore (_) can be used. Note, however, User Name must
start start with hyphen (-). In addition, "root", "null", "MWA", "AccessByEM-Poem", and names which are already assigned for
other number are not allowed.
*3: Up to 19 ASCII characters excluding " " (blank), " (quotation), & (ampersand), ? (question mark), = (equal sign), #, and ¥, can
be used.
*4: Privileges are defined as follows:
Administrator
: User who has administrator right. All operations are allowed.
Operator
: User who can operate the machine. Session management, license registration, remote KVM/media, configuration, and
update are not allowed.
User
: General user. Viewing IPMI information only is allowed.
*5: Can be specified only when Active Directory authentication is set to "Enable".
*6: Up to 255 characters including alphanumeric, hyphen, underscore, and period can be used.
*7: If Active Directory authentication is set to "Enable", at least one domain controller server must be enabled.
*8: Can be specified only when domain controller server is set to "Enable".
*9: Can be specified only when LDAP authentication is set to "Enable".
*10: Characters in the range between 4 and 62 including alphanumeric, hyphen, underscore, period, comma, and equal sign can be
used.
*11: Alphanumeric characters in the range between 4 and 31 excluding ", #, and ¥ can be used.
To Next Page
Loading...
Need help?
General