127
Configuring the Integrated Remote Console Trust setting
(.NET IRC)
The .NET IRC is launched through Microsoft ClickOnce, which is part of the Microsoft .NET
Framework. ClickOnce requires that any application installed from an SSL connection must be
from a trusted source. If a browser is not configured to trust an iLO processor, and this setting is
enabled, ClickOnce notifies you that the application cannot start.
NEC Corporation recommends installing a trusted SSL certificate and enabling the IRC requires a
trusted certificate in iLO setting. In this configuration, the .NET IRC is launched by using an
HTTPS connection. If the IRC requires a trusted certificate in iLO setting is disabled, the .NET
IRC is launched by using a non-SSL connection, and SSL is used after the .NET IRC starts to
exchange encryption keys.
Prerequisites
Configure iLO Settings privilege
Procedure
1. Click Remote Console & Media in the navigation tree, and then click the Security tab.
2. To enable or disable the IRC requires a trusted certificate in iLO setting, click the toggle
switch.
3. To save the changes, click Apply.
To Next Page
Loading...
Need help?
General