314
iLO Federation issues
Query errors occur on iLO Federation pages
Symptom
When you open an iLO Federation page, iLO peers and associated data might be missing from
the page, and the following error is displayed:
Errors occurred during query, returned data may be incomplete or
inconsistent.
Cause
This error might occur when a network communication error, configuration problem, or failed
iLO system prevents the retrieval of data from all systems in an iLO Federation group.
Action
• Wait for twice the configured Multicast Announcement Interval, and then refresh the iLO
Federation page.
If an iLO system was reconfigured and can no longer communicate with the local iLO system, it
will be dropped from its peer relationships after they expire.
• Check the Multi-System Map page for errors.
This page can help you identify communication problems between iLO peers.
• Verify that the switches in the network are configured to allow communication between iLO
peers.
• If you changed the network routes, subnet mask, IP address, or HTTP port for an iLO peer,
verify that the peer has a communication path to the local iLO system.
• Ensure that a communication path exists between the local iLO system and the peer with the
error.
An intermediate firewall or a change to the iLO network configuration and HTTP port setting
might block communication between the local iLO system and the peer.
A timeout error is displayed on the iLO Multi-System Map page
Symptom
The Multi-System Map page displays a Timed Out error for a peer of the local iLO system.
Cause
This error might occur in the following situations:
• A peer of the local iLO system has a peer that has failed.
• An intermediate firewall is preventing communication between the local iLO system and a
peer.
To Next Page
Loading...
Need help?
General