218
iLO access settings
You can modify iLO access settings, including service settings and access options. The values you
enter on the Access Settings page apply to all iLO users.
The default access settings values are suitable for most environments. The values you can modify
on the Access Settings page allow customization of the iLO external access methods for
specialized environments.
You can configure the following iLO security features on this page: ports, iLO interface and
feature access, password length, and iLO login security.
Configuring iLO service settings
The TCP/IP ports used by iLO are configurable, which enables compliance with site requirements
and security initiatives for port settings. These settings do not affect the host system. The range
of valid port values in iLO is from 1 to 65535. If you enter the number of a port that is in use, iLO
prompts you to enter a different value.
In addition to customizing the TCP/IP ports, you can also enable or disable iLO features in the
Service section of the Access Settings page.
Changing these settings usually requires configuration of the web browser used for standard
and SSL communication. When these settings are changed, an iLO reset is required to activate
the changes.
Prerequisites
Configure iLO Settings privilege
Procedure
1. Click Security in the navigation tree.
The Access Settings page is displayed.
2. Update the service settings as needed.
When you disable a service setting, iLO notifies you that the features that depend on the
service setting will be unavailable if you apply the changes.
3. Click Apply.
iLO prompts you to confirm that you want to apply the changes and reset iLO.
4. To apply the changes and reset iLO now, click OK.
It might take several minutes before you can re-establish a connection.
Service settings
You can configure the following settings in the Service section on the Access Settings page.
Secure Shell (SSH)
To Next Page
Loading...
Need help?
General