NEC iLO 5 User Manual

263
SNMP traps
SNMP traps lists the SNMP traps that you can generate with iLO 5.
Table 3: SNMP traps
Trap
number
Trap name
Description
0
Cold Start Trap
SNMP has been initialized, the system
has completed POST, or AMS has
started.
4
Authentication Failure Trap
SNMP has detected an authentication
failure.
1006
cpqSeCpuStatusChange
An uncorrectable machine check
exception has been detected in a
processor.
1010
cpqSeUSBStorageDeviceReadErrorOccurred
A read error occurred on an attached
USB storage device.
1011
cpqSeUSBStorageDeviceWriteErrorOccurred
A write error occurred on an attached
USB storage device.
1012
cpqSeUSBStorageDeviceRedundancyLost
USB storage device redundancy was
lost.
1013
cpqSeUSBStorageDeviceRedundancyRestored
USB storage device redundancy was
restored.
1014
cpqSeUSBStorageDeviceSyncFailed
The sync operation to restore USB
storage device redundancy failed.
1015
cpqSePCIeDiskTemperatureFailed
The temperature of the PCIe disk
crossed the upper critical threshold.
1016
cpqSePCIeDiskTemperatureOk
The temperature of the PCIe disk is
normal.
1017
cpqSePCIeDiskConditionChange
The status of the PCIe disk changed.
1018
cpqSePCIeDiskWearStatusChange
The PCIe disk wear status changed.
1019
cpqSePciDeviceAddedOrPoweredOn
A PCI disk was added or powered on.
1020
cpqSePciDeviceRemovedOrPoweredOff
A PCI device was removed or powered
off.
2014
cpqSiIntrusionInstalled
System intrusion hardware installed.
2015
cpqSiIntrusionRemoved
System intrusion hardware removed.
2016
cpqSiHoodReplaced
System hood replaced.
Table Continued

NEC iLO 5 Specifications

General

Brand	NEC
Model	iLO 5
Category	Server
Language	English