317
Firmware update issues
Unsuccessful iLO firmware update
Symptom
The following issues occur when you try to update the iLO firmware:
• iLO firmware is not responding.
• iLO did not accept the firmware update request.
• An iLO firmware update stopped before the update was complete.
Solution 1
Cause
A communication or network issue occurred.
Action
1. Attempt to connect to iLO through the web browser. If you cannot connect, there is a
communication issue.
2. Attempt to ping iLO. If you are successful, the network is working.
3. Try the firmware update again.
Solution 2
Action
1. Try a different firmware update method.
iLO firmware update error
Symptom
The following error is displayed during a firmware update:
The last firmware update attempt was not successful. Ready for the next
update.
Cause
An incorrect file was used to update the iLO firmware.
Action
1. To reset the flash process, click Clear Error, and then try the firmware update again with the
correct firmware file.
If you do not clear the error, the same error might occur even when you use the correct firmware
file.
To Next Page
Loading...
Need help?
General