315
• Network configuration changes are preventing communication between the local iLO
system and a peer.
• The enclosure that contains the peer is not configured for iLO Federation support.
Action
• Remove or repair the failed peer.
• Verify that the network is configured to allow communication between the iLO peers.
iLO Multi-System Map page displays a 502 error
Symptom
The Multi-System Map page shows a 502 error.
Cause
The listed peer rejected a request from the local iLO system.
Action
1. Ensure that a communication path exists between the local iLO system and the peer with the
error.
An intermediate firewall or a change to the iLO network configuration and HTTP port setting
might block communication between the local iLO system and the peer.
iLO Multi-System Map page displays a 403 error
Symptom
The Multi-System Map page shows a 403 Forbidden/Authorization error.
Cause
The group key on the local iLO system does not match the group key on a peer iLO system.
Action
1. Ensure that the group key matches for all iLO systems that are members of the selected
group.
iLO peers are not displayed on iLO Federation pages
Symptom
iLO peers (systems in the same group as the local iLO system) are not displayed on iLO
Federation pages.
Action
• Ensure that the group key matches for all iLO systems that are members of the selected
group.
To Next Page
Loading...
Need help?
General